How to make a ‘sun bathing mud’ in under an hour

You can make a sun bathing mat from a small clay jar with a small container of water.

You’ll need a clay jar and some sand, some water, a large pot and a bucket.

You can use any kind of clay that’s soft enough to hold its shape.

I used a little bit of sand, a bit of water, some dried beans and a little piece of clay.

Make a small hole and fill it with water.

Then fill the jar up with sand.

Make sure the sand is moist and that the water doesn’t come into contact with it.

You want to make sure the water is wet enough that it doesn’t soak into the sand, so you can start sanding the surface.

This will help you get rid of any excess sand.

Now put the clay jar in the water and fill the pot with water that’s at least 2 inches deep.

Put the lid on the pot and bring it to a boil.

After about 10 minutes, turn off the heat.

The clay will be bubbling and the water will be soaking into the clay.

The more you turn the pot, the more water you’ll need.

When it’s done bubbling, pour the clay into the bucket.

Leave it to sit for a few hours.

The sand will be a bit wet, so take some of the sand and rub it on the surface of the pot.

You’re done!

The sand can be reused as a mat for other purposes.

It’s easy to use and it’s nice to have some sand around for the beach.

You don’t have to buy a new clay jar or pot.

This clay will last for a couple of years if you don’t overdo it.