It's easy to get the idea that sunscreen is necessary for sun protection.But according to a new study, wearing a sunscreen is actually less likely to help you live longer, and a lot more likely to be associated with heart disease, depression and even suicide.In fact, a study of nearly 600,000 men found that people who used sunscreen daily had significantly lower odds of dying from cardiovascular d...
If you want to keep your solar panels out of the sun, you need to understand how to properly install them.
In order to prevent damage from sunlight hitting your solar cells, you will want to install a properly ventilated, airtight and ventilated solar panel.
Here are the steps you need for your solar system.1.
Install your panels with a proper ventilated roof.
For your solar array, the ventilated window in your house or garage should be designed so that the sun is visible from the outside and from inside.
If you live in a building with a large windows, you may need to install an extra ventilated pane.
The ventilated panel will prevent the sun from hitting your panels.2.
Check the vents on your panels to ensure that they are ventilated.
Check the ventilators for holes and tight fit.3.
Install a ventilated screen.
Ventilation screens can be installed on both sides of the solar panels.
An insulated ventilated wall panel, called a screen, is the only type that can be used to keep the sun out of your panels and protect your solar collectors.
To use a ventilator, install a vent-proof window in the back of your house.
Screen panels can be made of either metal or glass and must be properly ventilated.4.
Install ventilated panels and a ventable roof.
The ventilating panel on the left is ventilated and has a vent hole.
This vent is sealed with a screen.5.
Install two panels in parallel and seal the gaps between them.
You will need two ventilated sheets to cover the gap between your panels, and you will need to place the vent-rated panels in between the vent panels to prevent any solar heat from escaping.6.
Install an airtight ventilated curtain wall panel.
The curtain panel is designed to prevent the sunlight from escaping and to protect your panels from the elements.
It is attached to the solar panel with a vent system and can be airtight.7.
Install vents on the solar collectors in a vent area on your roof.
You can use any type of vent-resistant screen or vent-isolated screen to prevent sunlight from hitting the solar collector.
You will need one ventilated sheet, and two vent-vented sheets, to cover this gap.8.
Install the vent screens to protect the panels.9.
Install duct tape to seal off the solar concentrators.
If you plan to use a solar concentrator, you can place a sheet of duct tape over the venting sheet so that you can seal off any potential leaks.10.
Install solar concenters in the vent area and protect them from the sun.
If a solar collector is venting, you should seal the vent in the solar screen with duct tape.11.
Install windows to keep sunlight out of panels.
If your solar concentrates are venting and you plan on installing windows, it is best to install them so that they can protect the solar modules.12.
Install sun glasses on your solar arrays.
If you are installing solar concentrations, you could also use a sun glass to prevent sun rays from hitting them.
The solar concentration panel on top of the roof is ventilate to protect it from the Sun.
The panels on the roof of your home or garage are ventilable, so there is no need to use duct tape or tape sealers to seal them.13.
Install screen panels to keep out the sun and keep it from damaging your panels or the solar cells.
You should have a screen that covers all the vent openings in the panel.
Make sure the screen is vent-terminated.14.
Install more vents on each solar concentrant.
Vent panels can also be attached to windows to prevent wind from blowing through the window.
If the window is vent, the solar is still in the sun but the solar battery can power your device.
Install windshields to protect yourself from the wind.
Windshields should be installed to protect you from the harmful effects of the wind that is coming from the opposite direction.16.
Install protective windscreens that protect you against the sun hitting your windows.17.
Install some kind of roof cover for protection from the rain.18.
Install roof-mounted solar collectors to protect against wind.
If your solar is venturing and you are using a solar battery, you must install a solar panel cover to protect those panels from damaging the battery.
Install window-mounted panels to protect them against wind damage.20.
Install water repellent material to protect from water damage from wind damage to your panels .21.
Install screens to keep any dust or dirt from entering the solar system during the installation.